RibbFill

gastight

The RibbFill products are applied as gastight finishing of spaces. Among which, cooling and storage spaces,  which become optimally controllable with it. These extremely gastight, durable and wear-resistant coatings are high-quality, semi-fluid white pastes, dispersed in water, which form a permanent elastic rubber-like layer after drying. The RibbFill coating system consists of RibbFill Store Coat and RibbFill Control Coat.

 

RibbFill Store Coat

The RibbFill Store Coat has been developed specifically for the protection of polystyrene and for joint finishing in sandwich panel systems for the gastight finishing of spaces. This coating is often used in storage spaces for long term storage of fruit and vegetables, server spaces, high stage rooms and disinfection spaces. The coating retains a high elasticity after drying and therefore is very suitable in situations where larger joints and dilatations have to be bridged.

 

RibbFill Control Coat                 

The RibbFill Control Coat has been developed specifically for the joint finishing in sandwich panel systems for the gastight finishing of spaces. This coating is often used in storage spaces for long term storage of fruit and vegetables, server spaces, high stage rooms and disinfection spaces. RibbFill Control Coat is resistant against all kinds of acids and oils.

Application:
The RibbFill products have to be applied in at least two layers by means of an airless-sprayer or brush. The usage is approx. 2 kg/m2. The RibbFill products can be applied directly on polystyrene and PU foam. Other substrates have to be pre-treated with a RibbFill primer. We advise to enforce Joints and dilatations firstly with a RibbFill polyester film.

The safety card is available on request.

 

Application possibilities RibbFill:

- controlled atmosphere / ultra low oxygen (CA / ULO)

- server spaces

- disinfection spaces

- fruit and vegetable storage unit (PVF)

- high stage rooms

- wellness

- museums

- fire protection