Product description

RibbFill Freeze Coat is a water-based, one-component waterproofing product for walls and ceilings, based on acrylic dispersions. This coating has been specially developed for the gastight and vapourtight finish of rooms and remains elastic at lower temperatures below freezing point, down to
-30°C. It is widely used in storage rooms and freezer rooms where low temperatures are maintained.

  • Elasticity over 400%
  • Extremely gastight
  • High solid content
  • Does not contain tar or asphaltic substances
  • Retains its original film thickness
  • Resistant to several mineral acids, oils and alkalis
  • Unsaponizable
  • Durable and wear-resistant
Application Easy to apply with roller, brush or airless-spraying machine. Clean tools with water after use. Consumption & Packaging Usually 2 kg/m²
Buckets of 5 or 20 kg

Technical data

satin matt
Solid content
ca. 70% (weight) / ca. 60% (volume)
1,4 g/cm³
275 ±25 P (Brookfield 20 Rpm)
VOC content
max. 15 g/ltr
Layer thickness
2 kg/m²
Drying times (20°C / 50% R.H.)
repaintable after 24 hours
fully cured after 48 hours
Application conditions
min. 5°C / max. 80% R.H.
Surface preparation

Clean and degrease the surface. The surface must be cleaned, free of dust and dry. RibbFill Freeze Coat can be applied on all kinds of mineral and bituminous surfaces with use of the right primer.

Sustainability & Storage

RibbFill Freeze Coat has a shelf life of 12 months, provided that opened buckets are properly closed and stored frost-free, not in direct sunlight, between 5°C and 25°C.


Do you want to know where we apply our coatings?

View projects

We strive to work with high-quality products and safe working methods.

View certificates