Product description

Ready to use fixing primer based on solvent and chlorinated rubber with a very good adhesion on multiple surfaces. CorrFill Primer DL has been developed as a first layer in a Ribbstyle coating system to acquire a good adhesion on the substrate. Mainly used for coated steel and sandwich panels.

Properties
  • High fixation capacity
  • Improves the adherence
  • Unsaponizable
  • Flexible
  • Ready to use (do not dilute)
Application Easy to apply with roller or brush. After use clean tools with CorrFill Thinner DLT. Consumption & Packaging Usually 10 - 15 m²/ltr
Containers of 5 ltr

Technical data

Finish
satin
Colour
grey
Solid content
ca. 45-50% (weight) / ca. 36-38% (volume)
Density
1,07 -1,11 g/cm³
Flashpoint
> 23°C
VOC content
max. 550 g/ltr
EU limit values
750 g/ltr (2007) / 750 g/ltr (2010)
Layer thickness
10 - 15 m²/ltr
Drying times (20°C / 50% R.H.)
repaintable after 12 hours
fully cured after 24 hours
HS-code
32089091
UN-code
1263
Surface preparation

Clean and degrease the substrate. If the substrate is an acrylic paint, this must not be recoated with CorrFill Primer DL. The acrylic paint is affected by the solvents of CorrFill Primer DL. In this case, replace CorrFill Primer DL with CorrFill Primer PA.

 

Sustainability & Storage

CorrFill Primer DL has a shelf life of 24 months, provided that unopened buckets are properly closed and stored frost-free, in a dry and well-ventilated area, not in direct sunlight, between 5°C and 25°C.

 

Know more?

We like to help you!
Call +31 (0) 113 – 622 533

Contact us
Branches

Are you wondering about what we can do for your industry?

Overview branches