ProFill Roof Coat Plus is a waterborne, one-component protective roof coating that can be applied on several types of sloping roofs. It is based on styrene acrylate dispersions. This coating can be applied to all surfaces.
Product description
Properties
Buckets of 25 kg
- Permanently elastic
- Completely waterproof
- Suitable for all types of surfaces
Buckets of 25 kg
Technical data
- Finish
- satin gloss
- Colour
- grey, other colours on request
- Solid content
- ca. 65% (weight) / ca. 55% (volume)
- Density
- ca. 1,25
- Flashpoint
- n/a
- Viscosity
- 200 - 300 P (Brookfield 20 Rpm)
- VOC content
- max. 7 g/ltr
- Drying times
- tack-free after 3 hours
- repaintable after 6 hours
- Application conditions
- in dry weather
- min. 5°C / max. 80% R.H.
- HS-code
- 32091000
Surface preparation
The surface must be cleaned by spraying under high pressure. The surface must be completely clean and dry. Possible moss formation must be removed beforehand by means of a suitable anti-moss agent. Tears and cracks must be repaired with a suitable joint paste. For all surfaces, the inside spaces must be fitted with a vapor barrier and sufficient corresponding roof ventings, in order to avoid the development of condensation under the roof covering. Furthermore, sufficient gradient must be provided to the drains to completely absorb the rainwater. Mix well before use. Pre-treat porous substrates with CorrFill Primer BN. Bituminous substrates older than two years can be treated immediately with two layers of ProFill Roof Coat Plus.
Sustainability & Storage
ProFill Roof Coat Plus has a shelf life of 12 months, provided that opened buckets are properly closed and stored frost-free, not in direct sunlight, between 5°C and 25°C.
