Product description

ProFill Roof Coat is a waterborne, one-component, heat reflective coating for several types of sloping roofs. It is used as a UV-resistant layer under solar panels and as an ecological protective layer for all roofs. It is based on high-quality composite mineral additives and modified binders.

  • Permanently elastic
  • Seamless and crack bridging
  • Root resistant (applicable to the construction of green roofs)
  • Suitable for all types of surfaces
  • Environmentally friendly
  • Unsaponifiable (alcali resistant)
  • UV resistant
  • Vapor permeable
  • Protects roofs to a great extent against heating and thermal shocks
Application Easy to apply with roller, brush or airless-spraying machine. Clean tools with water after use. ProFill Roof Coat needs to be applied in two layers. Consumption & Packaging Usually 500 g/m² per layer
Buckets of 5 or 25 kg

Technical data

satin gloss
Solid content
ca. 65% (weight) / ca. 50% (volume)
ca. 1,43 g/cm³
150 P (Brookfield 20 Rpm)
VOC content
max. 30 g/ltr
Drying times
tack-free after 3 hours
repaintable after 6 hours
Application conditions
in dry weather
min. 5°C / max. 80% R.H.
Surface preparation

The surface must be cleaned by spraying under high pressure. The surface must be completely clean and dry. For all surfaces, the inside spaces must be fitted with a vapor barrier and sufficient corresponding roof ventings, in order to avoid the development of condensation under the roof covering. Furthermore, sufficient gradient must be provided to the drains to completely absorb the rainwater. Mix well before use. Always perform a bonding test. This product can be applied immediately to bitumen dredging, roofing felt and concrete. Pretreat other substrates with a CorrFill primer. For the waterproofing of roofs, use ProFill Roof Coat Plus in combination with CorrFill Fleece ZG as first layer.

Sustainability & Storage

ProFill Roof Coat has a shelf life of 12 months, provided that opened buckets are properly closed and stored frost-free, not in direct sunlight, between 5°C and 25°C.


Do you want to know where we apply our coatings?

View projects

We strive to work with high-quality products and safe working methods.

View certificates