Product description

MarrFill Floorcoat EC is a two-component pigmented epoxy coating without solvents for horizontal surfaces. This coating is very easy to process and has a high solid content. It has to be processed as a roll coating and is applied to mechanically loaded substrates consisting of concrete, cement screed, natural stone and more. In cured state, this coating is resistant to chemicals, such as jet fuel, diesel oil, heating oil, engine and machine oils, diluted acids, alkalis and de-icing salts. On top of that, MarrFill Floorcoat EC is also applicable in the food industry.

Properties
  • Completely solvent-free
  • Resistant to mechanical and chemical influences
  • Liquid-tight
  • Easily applicable
Application Easy to apply with an epoxy roller. Clean tools with CorrFill Thinner DLT after use. Consumption & Packaging Two layers of ca. 300 g/m²
Sets of 10 kg

Technical data

Colour
available in different RAL colours
Solid content
100%
Density (20°C)
1,7 kg/ltr
Viscosity (25°C)
ca. 2000 - 3000 mPa:s (comp A)
ca. 200 - 300 mPa:s (comp B)
Mix viscosity (25°C)
ca. 900 mPa:s
Drying times (20°C / 50% R.H.)
walkable after 24 hours
mechanically resistant after 2 days
chemically resistant after 7 days
Processing time
ca. 20 minutes at 30°C
ca. 40 minutes at 20°C
ca. 80 minutes at 10°C
Shore-D hardness
ca. 80
Mixing ratio
5:1 parts by weight
Adhesion strength
> 2,5 N/mm²
Application conditions
minimally 10°C, optimally 15°C - 25°C
HS-code
29072300 (comp A)
29212100 (comp B)
Surface preparation

The surface must be dry or slightly moist, absorbent and fixed. Above all, surfaces that are stained with oil, grease or wax-like products must be cleaned down to the sound concrete. Furthermore, always roughen smooth, dense or cement-rich substrates. Besides that, moving cracks in the underground must be closed. Consequently, add component B completely to component A and mix with a slow running drill at max. 300 revolutions per minute for three minutes until a homogeneous mass is obtained.

Sustainability & Storage

MarrFill Floorcoat EC has a shelf life of 12 months, provided that opened buckets are properly closed and stored frost-free, not in direct sunlight, between 5°C and 25°C.

Know more?

We like to help you!
Call +31 (0) 113 – 622 533

Contact us
Branches

Are you wondering about what we can do for your industry?

Overview branches