Product description

MarrFill Floorcoat PU is a two-component, solvent-free, pigmented coating based on polyurethane resins for horizontal and possibly vertical surfaces. This coating is very easy to process. The material must be processed as a roller coating and can be applied to concrete, cement screeds etc. MarrFill Floorcoat PU is resistant to mechanical and chemical influences and weathering, no yellowing will take place with UV radiation. The material is also very suitable for surfaces that are continuously exposed to water.

  • Competely solvent-free
  • Resistant to mechanical and chemical influences
  • Liquid-proof
  • Easily applicable
Application Easy to apply with a two-component roller. Clean tools with CorrFill Thinner DLT after use. Consumption & Packaging Two layers of ca. 400 g/m²
Buckets of 10 kg

Technical data

Solid content
1,48 kg/ltr
Viscosity (25°C)
ca. 4000 - 6000 mPa:s (comp A)
ca. 600 - 900 mPa:s (comp B)
Mix viscosity (25°C)
ca. 2700 mPa:s
Drying times (20°C / 50% R.H.)
walkable after 24 hours
mechanically resistant after 2 days
chemically resistant after 7 days
Processing time
ca. 20 minutes at 30°C
ca. 40 minutes at 20°C
ca. 80 minutes at 10°C
Shore-A hardness
Mixing ratio
4:1 parts by weight
Adhesion strength
> 2 N/mm²
Application conditions
minimally 10°C, optimally 15°C - 25°C
29072300 (comp A)
29212100 (comp B)
Surface preparation

The surface must be dry (moisture content <4%) and absorbent. Surfaces that are stained with oil, grease or wax-like products must be cleaned down to the sound concrete. With smooth, dense or cement-rich substrates, the substrate must always be roughened. Moving cracks in the underground must be closed. When applying MarrFill Floorcoat PU on an existing layer, this layer must always be sanded. Add component B completely to component A and mix with a slow running drill at max. 300 revolutions per minute for three minutes until a homogeneous mass is obtained.

Sustainability & Storage

MarrFill Floorcoat PU has a shelf life of 12 months, provided that opened buckets are properly closed and stored frost-free, not in direct sunlight, between 5°C and 25°C.


Do you want to know where we apply our coatings?

View projects

We strive to work with high-quality products and safe working methods.

View certificates