Product description

MarrFill Fast Flex is a two-component, pigmented or transparent, solvent-free and very fast-curing coating for horizontal and vertical surfaces based on a polyurea resin. This coating has a low viscosity and is very easy to apply with an epoxy roller or sprayer. It can be applied on substrates consisting of concrete, cement screed, steel, etc. MarrFill Fast Flex is highly resistant to chemicals, such as oils, solvents, acids, alkalis etc. after curing.

Properties
  • Completely solvent-free
  • Resistant to mechanical and especially chemical influences
  • Permanently flexible
  • Very fast curing time
Application Easy to apply with an epoxy roller. Clean tools with CorrFill Thinner DLT after use. Consumption & Packaging Usually two layers of 250 - 400 g/m²
Sets of 5 kg

Technical data

Colour
available in different RAL-colours
Density (25°C)
1,16 kg/ltr (comp A) / 1,10 kg/ltr (comp B)
Viscosity (25°C)
750 mPa:s (comp A) / 580 mPa:s (comp B)
Mixing viscosity (25°C)
ca. 2700 mPa:s
Drying times (20oC / 50% R.H.)
tack-free after 30 - 45 minutes
walkable after 1 - 1,5 hours
mechanically resistant after 2 - 3 hours
Processing time
10 - 15 minutes at 20°C
Mixing ratio
1:1
Application conditions
5°C - 35°C
HS-code
30021091 (comp A)
30021091 (comp B)
Surface preparation

The surface must be dry (moisture content < 6%) and absorbent. Surfaces that are stained with oil, grease or wax-like products must be cleaned down to the sound concrete. With smooth, dense or cement-rich substrates, the substrate must always be roughened. Moving cracks in the underground must be closed. Add component B completely to component A and then mix intensively for three minutes until a homogeneous mass is obtained.

Sustainability & Storage

MarrFill Fast Flex has a shelf life of 12 months, provided that opened buckets are properly closed and stored frost-free, not in direct sunlight, between 5°C and 25°C.

Know more?

We like to help you!
Call +31 (0) 113 – 622 533

Contact us
Branches

Are you wondering about what we can do for your industry?

Overview branches